Why Women’s Ski Boots Shouldn’t Just Be Smaller Men’s Boots

November 3, 2026

A conversation with Christie Burrow, Engineering Manager for K2 Ski Boots

Anthem was developed from the ground up around the fit, stance, and performance needs of female skiers. Christie Burrow explains why dedicated tooling, thoughtful geometry, and the right fit can change how a skier connects with the ski.


For those who don’t know you, give us the quick introduction. What’s your role at K2 and how long have you been with the boot team?

I’m Christie Burrow, the Engineering Manager for K2 Ski Boots. I’ve been with K2 for the past four and a half years.
In addition to working at K2, I work as a ski instructor at Stevens Pass. This year will be my 15th season as an instructor. I have a degree in Mechanical Engineering from the University of Colorado Boulder and designed wearable communication devices for first responders and the military prior to joining Elevate.

There are people who think a women’s boot is just a smaller men’s boot in a different color. What’s the reality? How is K2 changing their development process to design better products across the board?

While men’s and women’s boots have some differences, there is a lot of truth behind that perception. On a women’s boot, the cuff might be shorter or more flared, but it still begins with men’s tooling. Some boot brands claim a narrower heel pocket, but this difference is created by adding additional foam to the liner rather than within the shell itself. Other than that, the men’s and women’s models are essentially the same.
Ski boots are typically developed in one size (men’s 26.5 or 27.5) and then scaled to create the other sizes during a process called “grading.” Grading begins after the first size is near completion, making it difficult (if not impossible) for women to be involved in the evaluation of fit or function.
A few years ago, K2 started developing in both a 27.5 and a 23.5. This allows more people to be involved in the design process from the beginning. Developing these two sizes in tandem was really eye opening and led to a lot of new questions. What feedback was consistent between the sizes and what was different? What if we developed a women’s boot independently from the men’s boot, starting in a 23.5?

What are the most common boot-fit issues you see female skiers struggling with?

The main recurring issues we found women struggling with are:

  1. Heels are not held securely and often lift up inside the shell.
  2. Toe box space is too restrictive and can lead to cold or numb feet.
  3. Calf pressure and uneven shin contact leading to excessive pain, reduced ability to properly tighten boots, or “shin bang”.
  4. Slow initiation of the ski leading to the feeling of “skiing in the backseat”.
  5. Lateral responsiveness and ability to balance on the skis outside edge.
  6. Inability to find boots in the correct size or desired flex.

Those problems are all related. Boots currently in the market try to address some of these issues with “female specific features,” but ultimately, they aren’t considered from the beginning of the design process. 

Addressing these issues after the fact lead to new problems. For example: 

Adding liner foam to hold a narrow heel introduces soft pliable material that won’t respond as effectively as a heel which is closer to the hard shell plastic. The forces put through ski boots are more than enough to compress liner foams and make a foot feel like it is swimming inside a boot. 

Implementing a flared cuff to accommodate women’s lower sitting calves provides some relief but ultimately doesn’t account for the fact that a completely different shape of lower leg is entering the boot. Buckle levers remain the same length between lower and upper cuff positions, even though the ankle is much narrower than the calf area.

Photo by: Colton Jacobs

Why are you excited about Anthem specifically? What makes Anthem different from the boots you’ve skied or developed in the past?

Anthem is exciting because it’s the first time a women’s boot has been built from the ground up, with this much independence. It’s fundamental basis is creating a boot based on women’s feedback and backed-up by biomechanical research.
Ski boots are designed from men’s boots and “modified” to work well-enough for women. The industry has selected one or two standard women’s fit adjustments from the men’s models, and called it good. We decided that wasn’t good enough and wanted to see what would happen if we gave women the ability to dictate the design from the very start.
Anthem is designed with fully unique tooling (or parts) from it’s male counterpart (Recon). The design not only has dedicated shell, cuff, and liner tooling, but started in a size 23.5. The fit, stance, and performance were tested and evaluated by a group of female skiers, with building blocks based on feedback obtained through surveys, articles, retail, and media feedback from women across the globe in various sizes, brands, categories, and ability levels.
The narrower heel, more accommodating toe box, increased calf space, and alignment changes are built directly into the boot’s structure rather than created through liner foam pack adjustments or minor tooling changes. It allowed us to treat fit and stance as complete systems and design around the female body and how it moves.

Who is Anthem built for? What type of skier benefits most from a more technical boot?

Anthem is built for anyone who feels as though they are fighting against their boots, rather than having boots that move with them. All skiers benefit from a boot that is designed to more naturally align with how they move. The Anthem collection was designed with all levels of skiers in mind, with models built around beginner skiers looking for all-day comfort and forgiveness, as well as skiers looking to charge hard and get the highest performance out of the boots while not sacrificing comfort or mobility.
A boot designed around technical biomechanics benefits any skier who wants secure heel hold, stable support, predictable response during turn initiation, and a more connected feel with the ski. That does not mean only experts. Anthem spans sizes down to a true 21.5 and includes a flex range of 85 to 125, so skiers can select the appropriate performance level for them. Someone who is actively working to improve their skiing, spend more time on snow, and feel performance the way they initiate it from their body is going to benefit from a boot designed around them.

What are some of the biggest anatomical differences you see between female skiers and male skiers when it comes to boot fit?

These are general tendencies, not rules for every individual, but women commonly present with a narrower heel relative to the forefoot, a lower and more pronounced calf, a lower center of mass, and a wider pelvis. The wider pelvis can affect Q-angle and therefore how the knee and lower leg align over the foot. Together, those characteristics influence shell shape, cuff wrap, and both fore-aft and lateral stance.

Women’s calves often sit lower on the leg. Why does cuff height matter so much for comfort and performance? How was this accounted for during the development of Anthem?

Height is part of it, but cuff shape and wrap are just as important. If a lower, more pronounced calf is placed into a cuff designed around a straighter lower leg, the cuff can create pressure points throughout the shin, close unevenly, or force the skier to loosen the upper adjustment immediately.
With Anthem, we focused on a more conical wrap. We increased the diameter of the cuff around the calf, revised the cuff flap profiles, and redefined the stock positioning for each closure system. These updates allow for a more accurate out of box fit and stock positioning. Each feature still has a wide range of adjustability, however the center point has been adjusted to more accurately reflect consumer needs. The goal was not simply to create more room. It was to distribute shin pressure more evenly and help the cuff contact and support the leg without requiring modification as the default.

How does heel hold impact control? Why are so many women fighting heel lift without realizing it? What features does Anthem have that improve heel hold?

The heel is one of the key connections between the skier and the shell. If the shell’s heel pocket is too broad, the liner has to take up that space. The skier then compresses the liner foam before her movement reaches the plastic shell and, ultimately, the ski. That can feel like delayed response or a lack of precision rather than an obvious fit problem. Sometimes the problem can be significant enough that the heel lifts up within the boot, making the skier feel out of control and unbalanced. Since women typically have a lower center of mass (COM), when getting into a ski position, that mass is pushed backwards. When initiating a ski during a turn, it is important to get the COM forward, to be able to drive the ski as desired. As women work to get their COM forward, they often feel their heels lift up inside the boot to tilt the entire body forward.
By putting the narrower heel and ankle pocket directly into the shell geometry, Anthem creates a more secure, consistent hold. The liner can contribute comfort instead of being asked to compensate for the wrong underlying shape.
By increasing the ramp angle of the boot board (or the slope underneath the foot) the body sits in a more naturally forward stance, helping bring the COM over the front of the ski. This provides balance and support under the heel while improving translation of the body’s movement into the ski.

Photo by: Colton Jacobs

Why is it important to consider both ramp angle and forward lean as one component? What stance changes were made to Anthem?

Ramp angle and forward lean work together to determine stability through the ankle, so changing one without considering the other can create a new problem. Many boot fitters add heel lifts into women’s boots to move the center of mass forward and reduce movement within the shell. However, adjusting just the slope under the foot can make a skier feel like they are standing in a high-heel, unstable with pressure unevenly distributed under the ball of the foot.
With Anthem, we tested ramp angle and forward lean as a paired system rather than treating either measurement in isolation. Both forward lean and ramp angle were increased by 1 degree, in order to maintain stability through the ankle while naturally putting the skier in a stance with a more forward COM. One degree was selected after a group of testers were given 4 boot boards with different ramp angles and a boot prototype with adjustable forward lean.

Everyone talks about comfort, but how does proper fit actually translate into better skiing?

Proper fit reduces unwanted movement between the skier and the boot while distributing pressure more evenly. A securely held heel, an accurately wrapped cuff and a correctly shaped shell allow the skier’s input to reach the ski more directly. That supports quicker turn initiation, more consistent edge access, and better control.
Comfort and performance are not opposites here. A boot that creates less calf pain, toe restriction, or uneven pressure also lets the skier stay aggressive and on-snow for longer.
Fit should come from the shell first. The liner should add comfort and refinement, not be responsible for correcting the fundamental geometry of the boot. If the shell is the wrong shape, adding soft material may disguise the problem, but it can also introduce movement and reduce response.

The word “power” gets tossed around a lot in skiing. What does power transfer actually feel like on snow?

Good power transfer feels immediate and connected. When you move, the ski responds without a noticeable pause while your foot moves, then the boot, then the ski. You should feel that you can initiate the turn and move from edge to edge with a clear, predictable response.
It is not just about making a boot feel extremely stiff. It is about limiting energy loss between the lower leg, shell and ski while keeping the skier balanced enough to use that support.

What’s one boot-fitting term every skier should understand?

Last. The last is the three-dimensional shape around which the internal fit of the boot is developed. People often reduce it to a single forefoot-width number, but heel shape, ankle shape and toe-box proportions matter too. There are three main last types. Low-volume (LV), mid-volume (MV), and high-volume (HV). Ideally, you want to find a boot that most accurately represents your foot volume. Most people will want to buy a boot that provides both comfort and performance. In this case, knowing where you fall on the scale is important to finding that fit.
Generally, reducing volume will increase performance (like we discussed earlier with the foot being closer to the shell – therefore more responsive). When going for a lower volume performance fit, it’s best to work with a boot fitter relieve the pain points you might experience. They may be able to heat mold or grind a specific area to better conform to the shape of your foot. Always remember, skiing is meant to be fun. Your boots should not hurt you.
On the flip side: Increasing volume will reduce the reactiveness of your boots and skis, which can be helpful when learning. Increasing volume can improve comfort, but only to an extent. If the volume is increased too much, movement of the foot inside the shell can lead to early fatigue or unwanted pressure points. Think about trying to run in a pair of flip flops, your toes will curl to try and hold-on, which can be extremely tiring for your feet long term.
Knowing your foot volume is important. If you have a high volume foot, an MV boot might be your “high-performance” option. Alternatively, if you have a low volume foot, and MV boot might by your “comfort” option.

If every skier knew one thing about ski boots, what would it be?

Almost all boots come with an incredible amount of adjustability built in. Take some time with your boots to learn about the adjustment options and play around with them to find the best configuration for you and your body.
A lot of the boots on the market have features that allow for them to be adjusted to what we produced as the stock Anthem configuration. We wanted the boot to fit better out of the box, but still understood that not everyone will find these exact settings perfect for them. Sometimes your boots just need some tweaking, a small adjustment really can go a long way.

Flex ratings are often misunderstood. What’s the biggest thing consumers get wrong about flex?

While I can’t confirm for other brands, K2’s women’s boots are just as stiff as the men’s. The industry standard is to indicate a women’s model by ending the flex rating with a 5, while the men’s boots end in a 0. This is used for purchasing and SKU separation, and should not be interpreted as women’s boots being softer versions. At K2, a men’s 130 and women’s 125 of the same model use the exact same material blends.
Another big misconception is that flex is simply a progression from beginner to expert, and to be a good skier, you automatically need to be in the stiffest boot. The stiffest boot is not automatically the best-performing boot for you. To determine the right flex, you first need to understand the support you want and the way you prefer the ski to respond to your movements. A beginner skier may need a stiffer boot to support their body weight instead of collapsing when they try and initiate their skis. An expert skier may feel like a stiff boot is too reactive and drives their body instead of the reverse.
It is also not helpful when smaller-footed women or strong female skiers have fewer flex choices. That is why Anthem covers an 85 to 125 flex range. The goal is to let women choose fit and performance based on their skiing, not on what happens to be offered in their size.

What’s one weird thing you do when evaluating a new boot?

I look at the men’s boot next to the same boot in the women’s version. It’s generally pretty easy to spot where I might have fit issues, just looking at how the boot was graded. Something might look perfectly normal on the 27.5 but when you look at the 23.5, it just looks off. It can be frustrating when brands spend all their time, energy, and resources perfecting the sample size, but then clearly didn’t review the smaller sizes at all.

Most overrated boot-fitting advice?

“Everyone should size down a boot size.”
Not everyone is looking for a performance fit. No matter what your day looks like, cruising on greens and blues, competing in downhill or freeride competitions, climbing uphill, or having fun with friends and family, boots are the most important piece of gear dictating how your day will go. Take some time to consider what you are looking for from your time on snow, and select gear that is representative of that, rather than what will give you the highest performance.

Read More:

 

More Than a Women's Ski Boot: The Story Behind K2 Anthem

What happens when you design a ski boot by listening to the women who wear it? For Christie Burrow and the K2 team, it meant rethinking the process from the ground up.

READ MORE